Smokeless Type Incinerator for Medical Waste/Garbage/Domestic Waste Treatment

      WFS Series Waste Incinerator is a kind of machine that was developed on the basis of Japanese technology, absorbs advantages of similar equipment both at home and abroad. It features unique and advanced merits with compact size, high burning effect, reasonable burning technology, high degree of non-harm etc. It is an ideal choice for waste treatment of hospitals, hotels and various areas.

Main Features：

1. Gasified pyrolysis incineration is used for burning many kinds of waste.

2.Waste can be burned once everyday by gasified incineration.

3.Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust, dioxin etc.

4.Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.

5.Compact structure and small land occupation.

Working Principle：

    WFS series incinerator adopts the most advanced incineration method at the moment, that is, primary electrolytic gasification+ surround wind mixed incineration+ quadratic incineration+ burnout process. As the combustor designation adopting the gasification incineration technology which makes the temperature in incinerator from 200℃ to 800℃ in the first consumption chamber, the temperature in the second consumption chamber can reach 1200 ℃.

     So the garbage will not have the problem of frit, clinker and sintering during incineration process. Compared with direct fired furnace and other furnaces, gasification incinerator produces little dust. It has established a quadric incineration burner and surround wind device in the quadric incineration combustor. With a high temperature, combustible gas in the smoke can have sufficient burning, a sufficient mixed burning of gas from gasification incinerator and air at a high efficiency, which avoids carbon in the flame escape and late incineration.

     As using tangential admission, combustion air tangential admission and other combustion-supporting method, when the exhaust gas goes into the burnout room, it can fully burned again and at the same time be dusted with cyclostrophic flow. The incineration gas stay in the furnace for over 2 seconds，making combustible gas in the smoke fully burned with combustible in fly ash. On the top of incinerator, we have dry-type tail gas clean-up device which absorbs hydrogen chloride and sulfur oxide from the incineration. The stench is resolved at a high temperature. In the tail gas cleaning system, we have the neutralization reaction between calcium hydroxide filter brick and acid gas，achieving the goal of absorbing acid gas and cleaning tail gas, and making poisonous exhaust composition lower than the national regulated value of “hazardous wastes incineration pollution control standard（GB18484-2001）”.

    The incinerator employs a automatic program control which can save labor. The designation of furnace door and soot door both use a leakproof structure，which wholly isolates furnace from the outside while incinerating. It can also form suction firing, making it impossible to have secondary pollution. Especially on the handling of infective dangerous waste, the incinerator has a particular advantage.

Technical Specification: